FEOV/CE 90-240V AC DN 40-100 - ELECTRICALLY ACTUATED BUTTERFLY VALVE

Butterfly valve with multi-volt electric actuator 90-240 V AC 50-60 Hz
The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications.
In addition to the manually actuated version, FE is also available in FE/ CE electrically actuated and FE/CP pneumatically actuated configurations. FE/CD and FE/CP are constructed with actuators meeting current regulations and selected by FIP according to their quality and reliability requirements. The efficiency of these valves, tested according to the company’s quality standards, is guaranteed by the expertise and know-how that FIP dedicates to manufacturing its products.

Další charakteristika:

  • Electric actuator constructed according to FIP specifications; with plastic shell and standard emergency override. Available with voltages from 12 to 240V.
  • Rack & pinion type pneumatic actuator constructed according to FIP specifications: fully protected against weather corrosion available in double-acting (DA) or simple-acting normally closed (NC) or normally open (NO) versions.
  • Drilling pattern with oval slots that allow coupling to flanges according to numerous international standards.
  • Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid.
Zpět Produktový list

EPDM

Objednací číslo Materiál Kategorie Série d DN PN product.detail.attribute.B2 H Z product.detail.attribute.Amin product.detail.attribute.Amax product.detail.attribute.f product.detail.attribute.U product.detail.attribute.B7 product.detail.attribute.T1 product.detail.attribute.T2 product.detail.attribute.T3 g
FEOVEM050E FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 50-1''1/2 40 16 60 132 33 93.5 109 19 4 253 92 189 91 2074
FEOVEM063E FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 63-2'' 50 16 70 147 43 108 124 19 4 259 92 189 91 2254
FEOVEM075E FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 75-2''1/2 65 10 80 165 46 128 144 19 4 266 92 189 91 2480
FEOVEM090E FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 90-3'' 80 10 90 130 49 145 159 19 4 308 128 204 95.5 4000
FEOVEM110E FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 110-4'' 100 10 105 150 56 165 190 19 4 322 128 204 95.5 4350

FKM

Objednací číslo Materiál Kategorie Série d DN PN product.detail.attribute.B2 H Z product.detail.attribute.Amin product.detail.attribute.Amax product.detail.attribute.f product.detail.attribute.U product.detail.attribute.B7 product.detail.attribute.T1 product.detail.attribute.T2 product.detail.attribute.T3 g
FEOVEM050F FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 50-1''1/2 40 16 60 132 33 93.5 109 19 4 253 92 189 91 2074
FEOVEM063F FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 63-2'' 50 16 70 147 43 108 124 19 4 259 92 189 91 2254
FEOVEM075F FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 75-2''1/2 65 10 80 165 46 128 144 19 4 266 92 189 91 2480
FEOVEM090F FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 90-3'' 80 10 90 130 49 145 159 19 4 308 128 204 95.5 4000
FEOVEM110F FLS Measurement Instrumentation Elektricky ovládané pohonované armatury FE/CE DN 40÷200 110-4'' 100 10 105 150 56 165 190 19 4 322 128 204 95.5 4350
  • Disk in PVC-U with through shaft
  • Zinc plated square section steel stem completely isolated from the fluid complying with standard ISO 5211:
  • DN 40÷65: 11 mm
  • DN 80÷100: 14 mm
  • DN 125÷150: 17 mm
  • DN 200: 22mm
  • Can also be installed as an end line valve, bottom discharge valve or tank dump valve
  • Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations
  • Possibility of directly installing pneumatic and/or electric actuators with a standard drilling pattern according to standard ISO 5211 F05, F07, F10